SCAR sewage compound exhaust valve

Product overview

The product is used at the highest point on the sewage pipe or where there is closed air to remove the gas in the sewage pipe to dredge the pipe. Make the pipeline run normally, if not installed this valve, the pipeline will appear closed air, so that the flow rate of sewage by air resistance, and even interrupted.

 

 

Working principle

When the sewage in the pipe moves, the valve flap stops at the lower part of the fixed door frame. When the air is exhausted, the sewage enters the valve to float the ball first and pass it to the valve until it is closed. The naturally occurring gas inside the tube will be concentrated to the upper part of the tube to a considerable extent, and the valve hole will be discharged.

 

Technical parameters

The principle of SCAR exhaust valve is the same as that of CARx exhaust valve, except that the structure is slightly changed and the lever mechanism is slightly improved (as shown in the figure). This controls the float ball at the lower part, so that dirt can only wrap around the upper exhaust port at the lower part of the valve body without affecting the sealing performance. This product is dedicated to the exhaust valve of the sewage pipeline project.

 

Main connection dimension unit: mm